Our site works best with JavaScript enabled.

Back to the Support Centre

Viso Tent Pitching Instructions

Thanks to a few simple yet considered features, such as colour-coded poles, tabs, and clips, putting up our Viso 2 and Viso 3 tunnel tents is a breeze. Ben demonstrates how from the comfort of our Hathersage store.

Download the Viso PDF instruction sheet

Got no headphones and don't want to wake the cat up? Here are some written instructions that'll get your Viso pitched in a jiffy...

  1. Ensure the ground is free from sharp objects and rocks that may damage your groundsheet.

  2. Lay out the outer on the ground and peg out the back of the tent (preferably into the wind).

  3. Assemble poles and thread them into the colour coded sleeves, seat both ends of the poles into the eyelets.

  4. Pull the tent out to form a tunnel shape, peg out the ends nearest the door before pegging the rest of the tent.

  5. To attach the inner, get inside and work forwards from the back. Clip the two buckles at the back of the tent before fastening the yellow toggle on the inner to the yellow loop on the outer. Fasten the rest of the rear toggles, working your way outwards from the middle.

  6. Moving forwards, clip two buckles by the door of the tent before fastening the red toggle to the red loop in the ceiling. Fasten the rest of toggles, working your way outwards until the whole inner is attached.

  7. For the footprint, attach the bungee cords to the pegs that are already in place.

  8. Tension the tent by adjusting the buckles at the pegout points, peg and tension the guylines as required.

Get in and camp happy!

Updated: May 22, 2017