Our site works best with JavaScript enabled.

Back to the Support Centre

Lampray Instructions

Customer Service Hero Fran runs through the Lampray features and how to use them.

Download the Lampray PDF instruction sheet

Don't have headphones and you're worried about waking the dog up? Scroll down for written instructions...

Introducing Lampray. A magnetic rechargeable lantern and power cell that’ll brighten your evening and recharge your phone. If Lampray were a multi-tool, it’d be the multiest tool of them all! 

Important

Thank you for purchasing the Alpkit Lampray. Please curtail your excitement and do not use this product until you have read, understood, and complied with all the instructions and warnings contained within this manual, even if you are a bloke.

To Recharge

A display on the base of your Lampray indicates the power remaining, the Lampray charges with a micro-USB cable (included).

Plug one end of your micro-USB into the USB port marked ‘INPUT’, plug the other end into your computer, tablet, car, or plug. Charging time is around 5 hours. 

Instructions for Use

Lantern:

Press the power button on the bottom of the torch to turn on, keep clicking to shimmy through the settings:

Medium > High > Low > Flashing > Off 

To turn off, press the power button after 3 seconds on any setting

Power Cell:

To charge electronic devices, plug a USB cord into the port marked ‘OUTPUT’ on the side of the torch, plug the other end of the cord into the electronic device that you’d like to charge.

Warning
  • Do not shine torch directly into your eyes 
  • Do not submerge. 
  • Do not disassemble or modify this product as it will invalidate your warranty 
  • Keep Lampray clean to prevent dirt and dust from entering the electric elements 
  • Remove any moisture before storage
  • Do not store Lampray with batteries inside for long periods of time
Battery

3300mAH Li-polymer battery

Not regulated

Cleaning

Clean with a damp cloth

Storage

Ensure that the Lampray is dry before storing, store in a dry place.

Service and Repairs

If the lantern and power cell does not work, check that the it is charged and, if not, try recharging it.

If issues cannot be corrected using these instructions, contact Alpkit for advice.

Specification

Bulb: 1 x Cree LED

Lighting distance: 14 m

 

  Brightness Burn time Water Resistance
High 196 lm 8 h IPX5
Medium 100 lm  12 h IPX5
Low 10 lm 110 h  IPX5
Flashing N/A   IPX5

Updated: Apr 18, 2016