How can I adjust my wrist loops?

If you have accidently detached your wrist straps from your CarbonLites you must first remove the small plastic pin before you can rethread the strap. If you don’t mind doing it yourself then just a get a small screw driver and pop out the plastic pin that goes through the top of the handle, you then just put back the loops of the strap in and pop the pin back in.

Adjusting the strap may seem a bit fiddly at the start but it soon becomes easy. Basically you must:

- pull out the strap with the little plastic wedge from the handle and keep hold of it
- to shorten the strap pull the the strap that comes out underneath the strap with the plastic wedge
- to extend the strap pull one side of the hand loop
- when the strap is the correct length release the strap with the plastic wedge and pull tight the hand loop forcing the plastic wedge back into the handle

More details can be found in our Guide to using trekking poles

Created May 02, 2007
Category: Trekking Poles

Categories

All notes

Recently added:

Servicing your trekking poles
Gamma battery diagram
Left or right zip
Sleeping Bag Sizing
How to roll up a dry bag

Product Support

Some frequently asked questions and help topics to keep your Alpkit goodies in tip top order.

Manuals

Product information in print ready PDF format.

Product guides

From choosing which outdoor products are right for you, to living with your Alpkit goodies and looking after them.

Product descriptions

For more information on our major product lines see our Product Showcase.

Alpkit support