Bleat

You can contribute to the development of this product. See the purchasing instructions below.

We said last year that we would be launching a Merino baselayer range. Since then our woolly friends have been chewing their way through the greenest alpine meadows. These little chaps proved to be true alpine sheep and it has taken longer than expected to round them all up.. but we got them!

Detailed images

Taste the Merino / Polyester Blend

We have had a small run of 500 pieces made and they are available now from the Alpkit shop for £20. The garment and the fabric is made in the UK, the yarn spun in Italy and the wool.. well that comes from New Zealand Merino Sheep, but more of that to come later. Here are the numbers:

Features

  • Drop shoulder seam to prevent shoulder rub
  • Bent side seams
  • Centre front YKK zip (25 cm), for venting your chest hairs
  • Poly/Merino mix fabric
  • Extended back length

Specification

  • 43% Merino wool
  • 57% Polyester
  • Material Weight: 180gms
  • Garment Weight: 213g (medium)

Sizing

Size measurements vary across Europe which is why our size charts show the actual measurements of our base layer. We believe this is useful since you can compare Bleat directly with your existing personal layering system. Traditional British chest measurement are also given as a rough guide. If your forearms are bigger than 30cm in circumference then it will be tight. Please consult the size chart in the shop.

Shrinkage: These garments will shrink by 5% when washed.

Care and washing

Wool likes to shrink when washed. Despite the addition of Polyester these garments will shrink by approx 5%. Our fabric gurus have told us not to tumble dry but we will do some more testing and get back to you.

  • Easy care 30c
  • No Dry Cleaning
  • No Tumble Dry
  • No Bleach
  • No Ironing

The Alpkit - Merino Saga

We have been wanting to do base layer since we started, we had great things to say about using and abusing other peoples Merino and even a few contacts with companies like MAPP who make much of the merino used by the leading brands. The only trouble was that it wasn't in keeping with what we were doing with other products. Jim was (and still is) working hard on keeping the boulder mats made in the UK and holding the badge of being the best value mats on the market, so it seemed ridiculous to go and make a knitted sports wear product in China from New Zealand made fabric when we are based slap bang in the middle of so much textile heritage.

We got talking to a few local sportswear manufactures, showed them a few samples got a few made and were kind of happy with what they produced. We had planned on using a straight blend of merino sub 18.5 micron, real pukka stuff, but there was a rumour that a local company could make a polyester/merino blend. First thoughts were that that this was going to be Cloverbrook as they had been making some stuff for Marmot but it actually turned out to be a small company based in Leicester. This was looking great.

The deal was this: Merino to come from New Zealand, the yarn would then go to Italy, get spun into yarn, delivered to the knitters in Leicester where they would knit their magic and combine the Merino and polyester to form a Bi component interlock knit. When the fabric was ready it would be driven over to deepest darkest Nottinghamshire to get made into garments. That's still a fair way for a garment to travel but at least it was travelling most when it was at it's most compact.

So......ds Law. We had the samples ready, not quite how we wanted but still good. We had the fabric on order (6-8 weeks for the Yarn and then same again for the knitting) and it was all due for the Outdoor Show way back when in 2006. A few weeks before the outdoor show the initial fag packet manufacturing costings where blown out of the water, and our knitters where complaining about their z and s twists. So the Outdoor Show came and went and the Merino went on hold until the knitters could knit. We went on the hunt for a new manufacture, as we just couldn't afford to make it, sell it at a reasonable price and make a profit. In the end we were resigned to the fact that we would have to ship it out to China. Far from ideal.

Great News the merino was ready!
It was great news but caught us on the hop a little. Due to the way we have to buy stuff up front from many of our suppliers we simply couldn't fit it in the budget, we hated doing it but yet again we still had to stall the project. If we could make them in the UK then maybe we could get going but as it stood it was going to be months from buying the fabric to selling the garments. Then one of Jim mates threw us a lifeline, he knew of a clothing manufacture based in Alfreton, just stones throw from Both Rab and Terranova. So we took delivery of the fabric and drove it up one morning to the factory. It was busily made into garments and only a week or to late.

CoLABorative Engineering
Now it is over to you. Let us know what you think of the cut, the fabric and yes even the colour! This is what we mean by CoLABorative design.

Layering systems

With the advent of synthetic fibres we greeted first Helly Lifawear which made the North Sea that little bit more inviting, then Patagonia happened upon a company using an etched polyester fabric which turned a usually water hating fibre in to a water loving one; a fibre that actually wicked and more importantly one you could clean and care for, bonus. In the face of all this technological achievement sheep carried on chewing, and when the knitting process became refined enough to create superfine Merino at a cost that not only the best Italian mill could afford then Merino started to make a come back as a fibre to be reckoned with. Now every one is on the Merino bandwagon including us.

Wool grows on sheep

Wool is not just an inert piece of plastic it is a natural product, not quite living and breathing but it does react to changes in its environment. It is warm when wet – we haven’t figured the science but it’s true. It absorbs moisture vapour helping to keep you cool in summer and toasty in winter. This bi-component fibre manages moisture not just by wicking, but actually passes moisture along its structure. If you examined the strands of Merino with a really good telescope like Hubble, then you would see an amino acid called Lysine. This forms a molecular chain that just loves water, it encourages water vapour molecules to be drawn off the skin and along the wool fibres. At the same time there is also a transfer of heat which cools you down. Wool is great, sheep have been perfecting it for years but in general we don’t stand around chewing grass. Polyester has some great features of its own so by combining the two we hope to make a more functional product for active hillgoers. The inside face of the fabric is made from Merino, the natural fibres create tiny air pockets keeping you warm when wet. This is knitted together using an interlock stitching method to combine the polyester outer. The polyester outer uses much smaller denier yarns which have a much higher wicking action to disperse the moisture.

What's so funky about Merino wool anyway?

Wools natural ability to move humidity away from the body keeps you comfortable when you are working hard and its ability to keep you warm when wet makes it ideal for fast changing Alpine conditions.

Merino wool

Merino goodness

  • Sheep don't grow on trees but wool grows on sheep
  • It is as renewable as we are going to get
  • Its natural crimp will not sag or bag
  • Tear resistant
  • Easy care, more wear

Purchasing Instructions

We have a few sizes remaining in the shop.

Comments

Thanks for the great service great personal touch.
As for the Bleat yes its tight should have read tthe reviews but its a great tight fit material very good.

Posted on 22 August, 2007 by Shaun Bades

Any news on when they will be available again?
Will the bleats have slightly larger arms as well?

Posted on 20 August, 2007 by Michael

Hi would love to but one but think the sizing would be too small for me, i’m a 46-48” chest, an XL for smartwool etc, i like merino but dont like the huge price, so would like something a bit cheaper ie yours, also boxers etc would be great!

Posted on 19 August, 2007 by Campbell

I really like this - great fit, though I find the arms a bit tight. I wear mine for climbing, especially on those windy belays, so a bit more movement would be nice. Otherwise very nice, especially how light-weight it is while still being warm.

Posted on 12 August, 2007 by Dave W

A few small and medium bleats are still hanging around if your quick. We are currently working with the factories, getting more fabric and working through the comments on this thread to come up with Bleat Mk2.

Not sure an expected delivery date at the moment but it shouldn’t be too long if everything comes together in the next week or so.

We’ll keep you posted.

Posted on 09 August, 2007 by alpjim

Will the bleat be available again?

Posted on 09 August, 2007 by Andy Freeman

I may be at risk of repeating everyone else but it could do with being a BIT longer and the forearms a bit bigger. An elasticated wrist would be great too - oh and a slightly longer zip for those really sunny days we keep getting here in the Lakes :0)
Great blend of material though which wicks brilliantly and doesn’t smell even after a few days wear. Well worth £20 even with the first run teething problems.

Posted on 08 August, 2007 by Andy

Hello! great idea of color of this siyte!

Posted on 04 August, 2007 by Vilyambb

Used it for a week cycling round north-west scotland.  Pretty much perfect cut for me, though I’d echo the many comments of wanting slightly larger arms.  A bit of give in the cuffs would have been enough for me.

Cheers,
Lawrence

Posted on 30 July, 2007 by Lawrence Mitchell

Proof that you can please some of the people all of the time and..... Contrary to most people here I actually like the arm/cuff sizing and neck collar fit. I ordered small then changed it to medium, now it’s perfect- job done boys.

Posted on 28 July, 2007 by Gavin
Page 3 of 10 pages « First  <  1 2 3 4 5 >  Last »

More about coLAB : Develop projects

From time to time we may have a shorter than normal production run or simply want to try out something new. In such cases we launch the product under the coLAB branding, usually at a very tempting price in exchange for your feedback. No membership is needed, just use the product and leave your comments on our website.